Calibration and Validation of SWAP to Simulate Conjunctive Use of Fresh and Saline Irrigation Waters in Semi-Arid Regions

Soil–Water–Atmosphere–Plant (SWAP) version 2.0 was evaluated for its capability to simulate crop growth and salinity profiles at Agra (India) located in a semi-arid region having deep water table and monsoon climate. The data of 12 conjunctive use treatment combinations simulating cyclic and mixing modes of fresh and saline water for wheat were used to calibrate and validate the model. Absolute deviations between the SWAP simulated and observed relative yields during calibration ranged from 2.5 to 2.9 %. A close agreement in the trend and values of measured and simulated soil salinity profiles was observed. Scenario building simulations carried out with the validated SWAP revealed that the maximum crop yields varied from 97 to 99 % with the best available water (EC 3.6 dS m^?1) while the minimum ranged from 65 to 79 % in the treatment with all saline water. Other than this, the relative yield varied from 80 to 98 % in 10 other cyclic and mixing mode treatments. It was established that notwithstanding the seasonal build-up of salts due to saline water use, there would be no long-term build-up of salts as leaching during the monsoon season would render the soil profile salt free at the time of sowing of rabi (winter) crops. Thus, short-term field observations could be used in conjunction with SWAP to show that there seems to be an assured long-term sustainability when saline water is used in conjunctive mode with fresh water in monsoon climatic conditions with deep water table. These results are in conformity with the observation that many farmers in India are using saline and fresh water in conjunctive mode on a long-term basis.     

Novel Renewable Polyols Based on Limonene for Rigid Polyurethane Foams

Novel renewable polyols based on limonene were synthesized using thiol-ene “click” chemistry. These limonene based polyols were structurally characterized using wet methods (hydroxyl number, acid value and viscosity), gel permeation chromatography and spectroscopic methods. The results indicated that high yield of polyols from limonene based materials can be obtained using thiol-ene reaction. These limonene based polyols were used successfully for preparation of rigid polyurethane foams. These foams had regular shape cells and uniform cell size distribution. Thermal studies on these foams indicated that foams were thermally stable up to 250 °C. The glass transition temperature of the foams was higher than 200 °C. These rigid polyurethane foams had high compressive strength and the highest compressive strength of 195 kPa was observed. These foams have good physical–mechanical characteristics and could be suitable for all the applications of rigid polyurethane foams such as thermal insulation of freezers, storage tanks for the chemical and food industries, and packing materials for food industries.     

Thiamethoxam degradation by <Emphasis Type="Italic">Pseudomonas</Emphasis> and <Emphasis Type="Italic">Bacillus</Emphasis> strains isolated from agricultural soils

Twelve bacterial species were evaluated to know the degradation pattern of thiamethoxam in liquid medium. All the bacterial species could actively degrade phorate in a mineral salt medium containing phorate (50 μg ml^–1) as sole carbon source. As these species have ability to degrade, we used these for the degradation of thiamethoxam—a neonicoitinoids. Screening of 12 active phorate-metabolizing bacterial species resulted in selection of Bacillus aeromonas strain IMBL 4.1 and Pseudomonas putida strain IMBL 5.2 causing 45.28 and 38.23 % thiamethoxam (50 μg ml^?1) reduction, respectively, in 15 days as potential thiamethoxam degrading species. These two bacterial species grew optimally at 37 °C under shake culture conditions in MSMT medium raised with initial pH of 6.0–6.5 and use of these optimum cultural conditions resulted in improved thiamethoxam degradation by these bacterial species. These species caused maximum thiamethoxam degradation only in the presence of thiamethoxam as sole source of carbon and energy and the same was reduced in the presence of easily metabolize able carbon (C₀ and C₁) and nitrogen ((N₀, N₁ and N₂) sources. This could be attributed to involvement of repressible metabolic pathways, reactions of which are inhibited by the presence of easily available nutrients for growth. Besides above, qualitative analysis of thiamethoxam residues by gas liquid chromatography revealed complete metabolization of thiamethoxam without detectable accumulation of any known thiamethoxam metabolites.     

Biodiesel production from a free fatty acid containing Karanja oil by a single-step heterogeneously catalyzed process

Karanja oil, containing 6.2% free fatty acids (FFAs), was considered for biodiesel production using a single-step solid-phase acid catalyzed process. Different types of zeolites and Amberlyst15 catalysts were tested and biodiesel was produced. Under similar conditions, the highest biodiesel yield was achieved using an Amberlyst15 catalyst, which contained 3–5% of moisture. The effects of operating parameters of the reaction such as reaction temperature, catalyst amount, and methanol-to-oil ratio were studied. An increase of methanol:oil ratio revealed a non-monotonic increase in biodiesel yields. Similar non-monotonic behavior was observed when Jatropha oil was used. Leaching and catalyst reusability were also considered. No significant effects of leaching were observed and catalyst reusability appeared to be affected by methanol interactions. The presence of a co-solvent, Tetrahydrofuran (THF), increased the biodiesel yield. Furthermore, an optimum amount of THF (THF:methanol volume ratio of 1:2) gave rise to the highest biodiesel yield. A biodiesel yield of 93% was achieved at 120 °C using a single-step process with Amberlyst15 as a catalyst, THF as a co-solvent, and a methanol:oil ratio of 30:1.     

Experimental evaluation of the catalytic efficiency of calcium based natural and modified catalyst for biodiesel synthesis

Transesterification of a mixture of vegetable oils with methanol using metal oxide catalysts derived from snail shell (SS) for biodiesel production was investigated. The metal oxides obtained from calcined snail shells in the temperature range of 650°–950 °C and modified by loading different potassium salts were used as a catalyst in the process. The catalysts were characterized by FT-IR, XRD, SEM-EDS, XPS and TGA. Catalytic activities of developed catalysts were also tested by Hammet indicator method and ion exchange method. The best calcination conditions were observed at 850°C for 4 hours based on biodiesel yield. The KF loaded snail shell gave highest biodiesel yield of 98 ± 1% in a batch reactor with highest basicity (15.9 mmoles/g) and basic strength measured by Hammet method. The optimized reaction conditions were: reaction temperature 65°C, reaction time 3 hours, methanol to oil molar ratio 9:1 and catalyst concentration 3wt%. Leaching and reusability tests confirm the stability of the catalyst as it encounters only 3% of leaching and small changes in catalytic activity up to five runs in terms of biodiesel yield.     

Inclusive development,oil extraction and climate change: a multilevel analysis of Kenya

There has been considerable research on North–South issues on climate change; however, little work has been done on how the recent discovery of oil in some developing countries could affect North–South relations, the prospects for development for the South, climate change and local socio-environmental issues. Using the theory of inclusive development, the concept of the Right to Development, and their relation to stranded assets, this paper addresses the question: what does inclusive development imply at the national and global level in dealing with oil extraction in the context of climate change? Based on a literature review and a layered case study of Kenya, this paper concludes that (a) Kenyans argue that Kenya has a right to extract and use oil resources and that rich countries should reduce their extraction and use; (b) such a claim could be integrated in an appropriate emissions trading scheme; and that (c) Kenya should also account for the national and local socioecological aspects to reduce potential local conflict, yet the conditions favoring inclusive development are not yet established. However, such an argument may also lead to perverse results. If addressing climate change requires phasing out fossil fuels, this argument may lead to stranded assets in both developed and developing countries, and may ironically leave developing countries poorer off as stranded assets are possibly more expensive than having stranded resources.     

The recent occurrence of exotic freshwater fishes in the tributaries of river Ganga basin: abundance, distribution, risk, and conservation issues

We record here the recent occurrence, abundance and distribution of six exotic fish species, viz. Oreochromis mossambicus, Cyprinus carpio, Hypopthalmicthys molitrix, Ctenopharyngodon idellus, Clarias gariepinus, and Pterygoplichthys disjunctivus (a new exotic in India) distributed through the four important tributaries of river Ganga basin in India. From the total catch, the abundance index of all exotic species in different rivers ranged from 1.1 to 14.5?% with highest value in River Gomti. The relative abundance of the exotic species in all the four tributaries demonstrated that a single species C. carpio contributed a considerable abundance (43.3?C83?%) than that of the remaining exotic fishes. The Common Carp, C. carpio, was ubiquitous in all the four tributaries of Ganges basin studied and had the highest local distribution (52.63?%). Smaller size groups of endangered (Chagunius chagunio, Chitala chitala, and Tor tor) and migratory species (Bagarius bagarius, Ompok pabda, Wallago attu, and Sperata aor) in the four tributaries were recorded, and the increasing appearance of Common Carp and other exotic fishes is signaling biological invasion. Possible threats to the indigenous fish fauna, as a result of the invasion and proliferation of these exotics, are discussed.     

Assessment of habitat quality with relation to fish assemblages in an impacted river of the Ganges basin, northern India

In this work, we examined water-quality assessment in relation to fish assemblage of Gomti River, a large tributary of the Ganges River basin in northern India. Principal component analysis was performed for 18 environmental variables which produced three axes that cumulatively explained 60.23% of the environmental variation in sites. Fifteen variables (fine substrate fine gravel, coarse gravel, cobble, sand substrate water flow, conductivity, TDS, total hardness, temperature, dissolved oxygen, pH, and overhanging vegetation) had high loadings on at least one of the principal component axes interpreted. The canonical correspondence analysis was used to establish the relationship between important fish species and environmental variables. Species were distributed within four groups with respect to the significant habitat characteristics. The Pearson correlation coefficient was calculated between the water-quality parameters. We concluded that the level of species richness is mostly dependent on abiotic factors like temperature, dissolved oxygen, TDS, conductivity, depth, pH, and water current in the Gomti River, of the Ganges basin.     

Identification of degradation products of thiram in water, soil and plants using LC-MS technique

In order to evaluate the deleterious effects of exposure to pesticides on a target population, a comprehensive study on their degradation in the various segments of ecosystem under varying environmental conditions is needed. In view of this, a study has been carried out on the metabolic pathways of thiram, a dithiocarbamate fungicide, in a variety of matrices namely water and soil under controlled conditions and plants in field conditions. The identification of degradation products was carried out in samples collected at various time points using LC-MS. The degradation products identified can be rationalized as originating by a variety of processes like hydrolysis, oxidation, N-dealkylation and cyclization. As a result of these processes the presence of some metabolites like dimethyl dithiocarbamate, bis(dimethyl carbamoyl) disulphide, bis(dimethyl dithiocarbamoyl) trisulphide and N-methyl-amino-dithiocarbamoyl sulphide was observed in all the cases. However, some different metabolites were observed with the change in the matrix or its characteristics such as cyclised products 2(N, N-dimethyl amino)thiazoline carboxylic acid and 2-thioxo-4-thiazolidine were observed only in plants. The investigations reflect that degradation initiates with hydrolysis, subsequently oxidation/dealkylation, followed by different types of reactions. The pathways seem to be complex and dependent on the matrices. Dimethyl dithiocarbamate and oxon metabolites, which are more toxic than parent compound, seem to persist for a longer time. Results indicate persistence vis-a-vis toxicity of pesticide and its metabolites and also provide a data bank of metabolites for forensic and epidemiological investigations.